A DIY Chimney Sweep Vs. A Professional Chimney Cleaning


You know that you must keep your chimney clean so that you may view this as a do-it-yourself project. We understand that you may not want to deal with the process of hiring a professional chimney cleaning company in Vancouver, but this is your best option.

Hiring a company for the task offers some advantages that you cannot afford to ignore. For instance, this option will keep you safe. Unfortunately, some homeowners experience an accident while cleaning their chimneys.

There are many professional chimney cleaning companies, so it’s essential to do your due diligence on the prospective company before hiring them. Let’s take a close look at three advantages of electing to get professional chimney repair or chimney sweep.

An example of a bricked chimney

You Don’t Have the Proper Training for the Job.

When you have years of experience with chimney cleaning, you can spot chimney problems with ease. Skilled technicians know how to examine the interior of your chimney without putting themselves in harm’s way.

Let’s say there’s an issue with your chimney’s structure. This can cause a severe problem. For instance, there’s a possibility that the fire can spread. The technician can uncover your chimney issues and make a professional recommendation for repairs.

You Don’t Have the Right Tools.

Chimney technicians employed by reputable chimney companies in Vancouver have the right tools for the job. You can buy the tools, but they are expensive. Purchasing the brushes and inspection equipment could put a massive dent in your budget. It will be cheaper for you to hire someone with experience.

You Can Learn New Things from Your Chimney Sweep

Using your fireplace during the harsh winter months will keep you warm, but there’s a possibility that you may have been doing something wrong. For example, you may have been burning the wrong wood. A skilled technician will point this out and give you useful tips to keep your fireplace in great shape and keep you safe.

Special thanks to our friends at the Chimney Sweep Cleaning Guy for this blog post! Find them here:

Chimney Sweep Cleaning Guy
Vancouver, BC
(604) 359-1117

Plaster Walls vs. Drywall


When it comes time to make a choice between plaster walls or drywall, it pays to understand the difference between the two and how they differ in the installation process. Careful consideration should also be given to the desired finished appearance, how labor intensive the whole process is and of course, the cost involved, and overall Vancouver drywall contractor hourly rate.

abandoned home vancouver drywall

The Main Differences Between Plaster Walls And Drywall

Installing drywall involves nailing sheetrock boards to studs ultimately giving the room a flawless and seamless appearance. The drywall process is not labor intensive at all, resulting in an inexpensive product. Many more buildings feature drywall than plaster as a result of the cost difference. Plaster wall is regarded as more of an art form and is, therefore, more expensive and time-consuming, although is textured in appearance and seen as a more sophisticated and upmarket. Plaster also has a more historical value as it is an older style of construction, sitting perfectly in the vintage market.

All About Plaster

Applying plaster yourself is not as simple as you may think. It takes a qualified drywall tradesman years to gain the expertise to be able to perfect the application technique. With this in mind, the home handyman can purchase plastic compounds pre-mixed as well as in the dry compound form that is prepared with water.

A more modern version of the plaster wall is available in the form of veneer plaster. Installed in the same way as sheetrock drywall panels, veneer plaster is made from gypsum panels similar to drywall, finished with multiple layers of veneer plaster giving the appearance of the traditional plaster wall.

All About Drywall

From the home handyman to the professional tradesman who you can find at https://drywallvancouver.ca, drywall can be installed by almost anybody. Drywall comes in wall-sized panels made of sheetrock. It is available in 1/2 inch and 5/8 inch thicknesses, which thickness you decide upon depends upon the level of sound proof-ness that you require as well as how much you may need to manipulate the board. Although 1/2 inch is less expensive and easier to manipulate, the 5/8 inch panels add a level of extra strength as well as drastically reduce the outside sound.

The panels can be cut to the required length, placed into position and securely fastened. A tool that can aid in this installation process is a sheetrock hanger. This tool can save a lot of time on your project as it lifts and holds your panel in place while you fasten it.

A very handy tip from the professionals is to use drywall screws as opposed to nails. The nails gradually make their way back out creating unwanted bumps in your finished product, while the drywall screws will hold steady even as your completed wall settles.

Difference In Cost

Including the expense of labor and application of both products, drywall is almost always less expensive than plaster wall. This takes into consideration the setup costs for a plaster wall application as opposed to the simple nail or screw in the technique used in the drywall installation.

A great solution for those of us who want a plaster wall look without all the fuss is the veneer plaster. Expense wise it sits in the middle ground and is very popular with those wanting the vintage look without the traditional mess of the plaster wall.

The most cost-efficient and sensible option for almost all areas of the average home is most definitely a drywall application.

Drywall Contractors Vancouver

Drywall Vancouver
82 E 37th Ave, Vancouver, BC V5W 1E2
(604) 229 – 3691



What Is The Cost Of Drywall?


!function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0],p=/^http:/.test(d.location)?'http':'https';if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src=p+"://platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs");

What is the drywall?

The main component of drywall is gypsum which is a soft sedimentary mineral. Gypsum is a sedimentary mineral which is dug from the ground to manufacture fertilizers, plaster or for use in construction industries. As a result of its soft nature, gypsum is flattened into a sheet with a thickness of about 3/8″ to 5/8″. Plasterboards are flattened into panels measuring 8’ × 4’ for installation as ceilings, walls inside a house or any other structure inside the house.

Drywall installation costs about $1.50 per sq. Foot but the cost may range between $40.00 – $60.00 after buying the materials and paying needed labor. If you have a 12 × 12 room, you will have to use 12 panels making the total cost range from $480.00 – $720.00. Drywall installation does not need a lot of skills and experience, and hence you can do it yourself if you’ve necessary skills and time. However, if you need professional services, you can hire a contractor to install the drywall for you.

Drill for contractors in white background

The size and complexity of drywall installation in your home may determine installation cost. Rooms with arches or have non-standard dimensions may cost more than just a basic room with regular dimensions. If you only drywall installation in a small room, you may end up paying more to cater for transport, time, insurance costs, etc. unlike if you had a big room. For instance, for a small bedroom, you can end up paying $3.00 per sq. ft. while another homeowner with 14,000 sq. ft. End up paying $1.15 per sq. ft. In addition to the size of the room, there are other factors that can influence the cost of installing drywall:

  1. Job site location – if the Vancouver contractor will have to travel a long distance to get to your home, you may end up having extra fuel costs
  2. Environment – different places have different weather conditions. Weather affects transportation of the materials and works time too• Non-standard features in a room – this may demand more time and labor to have the perfect room. You may end up paying more for the services.
  3. Non-standard features in a room – this may demand more time and labor to have the perfect room. You may end up paying more for the services.

When doing your estimates, include the following to avoid having a hefty budget:

  1. Materials and equipment transportation costs
  2. Job site preparation costs including finishes
  3. The cost of materials needed. Include dimensions and the type of panels to be used
  4. Total labor costs
  5. Clean up and debris removal after installation

Drywall panel sizes and costs central drywall panel is 8’ tall × 4’ wide with its thickness ranging from 1/4 ‘’- 5/8’’. For very tall ceilings, there are some drywalls which measure up to 16’ tall. It is important to note that panels used for ceilings have a thickness of 1/2 ‘’ – 5/8’’ because they are resistant to sagging after installation.

Hammer used for drywall construction

As per cost, a standard 8’ × 4’ plasterboard panel is between $10.00 and $20.00 depending on its brand, thickness, and mold resistance. Also, your location may determine the cost of the drywall panel. If you want a drywall panel to do small repairs on your wall or ceiling, 16’’ × 16’’ costs around $5.00 each while the cost of compound panels which are unmixed ranges from $5.00 to $9.00.

Premix compounds cost about $15.00 per 5 gallons depending on the amount you need. You can include a joint drywall tape on your budget although its costs vary widely depending on whether you want mold resistant, original joint tape, laminated, fiber mesh, etc. You will need to know what suits your home and your budget to shop wisely as rolls range from $3.00 to $5.00. The cheapest tape rolls cost about $1.75 while some can go up to $15.00!

Written by Kevin Ngo, a drywall contractor in Vancouver, BC

Drywall Vancouver
82 E 37th Ave, Vancouver, BC V5W 1E2
(604) 229 – 3691



Easy Drywall Installation Tools And Equipment



Why Should You Consider Drywall?

If you have ever dreamed of building your dream home, then the main thing that has probably put you off is the costs involved. There are a lot of different factors to think about when you are considering the costs of a house build. Not only will you have to purchase materials and equipment but you are also likely to need the services of engineers and architects, although they may be able to help by suggesting ways that you can reduce costs.

Many construction firms are now suggesting that people use drywall in their new homes. Drywall Vancouver companies can be used as partitions to make each room separate, and they are much easier to install than brick and cement walls as well as being a lot cheaper. They can be installed by a professional contractor efficiently in no time at all.


There are some reasons why drywalls are such a good alternative to bricks and cement. When the walls are completed, they will look good in your home, and they can be used for both walls and ceilings. Even though drywall is cheaper, it does not mean that you have to compromise on quality. Drywall is made from a material that is fire resistant and also waterproof and so is perfectly safe to use in all types of properties.


Drywall can also be used in houses that have already been built, to split a large bedroom into two smaller ones for example. Construction companies also prefer using drywall because it is far easier to install. Some different materials can be used to create drywall including wood, fiberglass and gypsum plaster.

There is a whole range of tools and equipment that can be used by contractors when they are installing drywall. The ten most common tools used for home drywall repair are listed below.


  1. Drywall T-Square. When a T-Square is used, then you can be sure that the drywall will fit perfectly and can be lined up accurately. T-Squares can also be used for other jobs so are a useful piece of equipment.
  2. Drywall Lifts. A drywall lift can be used to hold the wall in place while it is affixed to the ceiling. This means that a contractor can complete the job on his own as they won’t need to ask anyone else for help supporting the wall.
  3. Drywall Router. If there is anything that needs to be put on the drywall such as a window or a hole for a pipe to pass through, then this can be cut out of the drywall using the router.
  4. Taping Knife. This is sometimes also referred to a finishing knife and can be used to remove any uneven edges from the sides of the wall.
  5. Circle Cutter. If you need to cut a circular shape into the drywall, then a circle cutter will be the best tool to use.
  6. Keyhole Saw. This is a saw which is long and narrow and can be used to cut small shapes into drywall. They can either have a fixed blade or retractable blade.
  7. Power Jigsaw. This tool can be used if you want to carve an intricate design into your drywall. Care should be taken as it is a powerful tool.
  8. Rasp. A rasp is a long tool with sharp edges which can be used to shape wood and the other materials that drywall can be made from.
  9. Utility Knife. A utility knife is a small tool that has many different functions, and many contractors consider this to be one of their most essential pieces of equipment.
  10. Drywall Saw. This type of saw is most suited to drywall that is made from wood, but it can be used with a harder blade for softer materials. The saw will usually have either rough or serrated edge.


Drywall Contractors

Most contractors will use some combination of these tools to install drywall within a home. This is because all of the tools help to make the job easier and they can also make sure that the job is finished to a higher standard. Drywalls are an excellent choice to use in the construction of a home because they are a very viable option and when these tools are used drywall installation also becomes very easy.

Vancouver Drywall Companies

Drywall Vancouver
82 E 37th Ave, Vancouver, BC V5W 1E2
(604) 229 – 3691

How To Repair Recurring Cracks In Drywall Part 1


Repairing cracks in walls can be a hassle especially when the breaks keep coming back. Reasons for the recurrence of these cracks which can be annoying may be as a result of shoddy repairs or use of the wrong materials for reconstruction. It is crucial to repair the break as soon as you notice it even if it is at a place where no one would quickly notice like behind the furniture. If you deal in rental homes, you will also need to repair a lot of drywall crack as you prepare houses for new homeowners.

a drywall crack that needs to be repaired

This article is meant to be a reliable guide when making quality and permanent DIY repairs.

First things first, you will need to have the following materials for your project to success:

  • Fiberglass mesh drywall tape
  • 3M Patch Plus Primer
  • Putty Knife
  • 6-inch drywall knife
  • Joint compound mud pan
  • Sanding sponge
  • Towel for the floor
  • Your wall paint
  • A few episodes of your favorite show

These are easy to find and buy at any hardware store close to you.

With the materials above at hand, you are now ready to begin repairing your drywall cracks.

It is vital that you follow these instructions carefully to get quality drywall crack fix:

  1. Apply the Fiberglass Mesh drywall Tape to the crack on your wall
    When fixing cracks, most people make the mistake of adding joint compound or spackling directly to the drywall. When you do this, the blow will eventually come back since the mixture, or spackling cannot hold the break by itself. To fix cracks on drywalls, the mesh tape is essential. The Fiberglass mesh drywall tape, in this case, is meant to add the support needed by the compound to hold the two sides of the crack together.
    You should make sure that the tape is centered on the crack. This is done by placing the sticky side on the wall and then getting your Patch Plus Primer ready.
  2. Apply a thin coat of the Patch Plus Primer to the Mesh Drywall tape
    The 3M Patch Plus Primer works well when repairing cracks and holes on drywalls because one does not need to apply a primer coat needed when using a traditional joint compound. This saves the user time and even money that would be spent in buying additional materials. However, when purchasing the 3M Patch Plus primer at your selected store, it is essential to ensure that it is unopened. This is because the content may be harmful which renders it unusable as it won’t give you the desired results. This should also be considered when purchasing other products that are packed in containers, and this includes the pre-mixed joint compound.

Written by Drywall Vancouver | Drywall in Vancouver

Drywall Vancouver
82 E 37th Ave, Vancouver, BC V5W 1E2
(604) 229 – 3691

water damage that needs to be ceiling repaired

How To Repair Recurring Cracks In Drywall Part 2


flexible drywall repair crack that can be handled

When you have a long crack that ranges from 2 to 5 feet, it is advisable to apply the patch plus primer onto the tape by using a 6-inch drywall knife. To be able to use the 6-inch drywall knife, you have to scoop a small amount of Patch plus primer into a mud pan to ease the exercise.

When applying the spackling, start at the center of the tape. Spread it onto the tape following a downward motion from the middle of the tape. Add the remaining spackling by moving in an upward manner from the tape’s central part. This procedure prevents the Fiberglass Mesh drywall Tape from wrinkling by stretching it along the crack. Give this coat some time to dry, preferably 30 to 40 minutes before moving on to the next step.

  1. Add the second Patch plus liner coat
    The light coat in the previous step was to avoid having a large hump on the wall where you stuck the Mesh tape. Use the 6-inch drywall knife to apply the second patch plus primer coat. Apply the layer such that it is two inches to the left and two inches to the right of the central part of the tape. After this, smooth out your spackling with the drywall knife by beginning in the middle and moving towards the ends. To attain the best results, use slightly more pressure on the sides of your blade that are in contact with the wall. The change in force applied is meant to feather the Patch Plus Primer and makes it blend into the already existing drywall. You can apply up to 3 coats on the wall depending on how perfect you want the wall to look in the end.
  2. Lightly Sand the Patch Plus Primer
    When working on small drywall repair jobs, a fine grit sanding sponge can be used to feather the edges of a joint compound or to spackle. This is done by lightly moving the sanding sponge in circles on the patched area. The circular motion that is made helps in blending the patch into the drywall. If the repair is done right, it should be impossible for the naked eye to note the difference on the patched area from the rest of the wall when you are done.
  3. Paint your wall
    The 3M patch plus primer works to your advantage since you do not have to prime the wall again before applying paint. The piece plus primer will be ready to be painted over after 30 minutes or so. To achieve the best results use a high quality and reliable roller or paintbrush. An example of a suitable quality paint brush is a Purdy 2 inch brush whose bristles are durable and stay in good shape even after two years of use. The paintbrush should be well maintained if you want it to last long. This can be achieved by rinsing it in warm water after every use and wrapping it in Glad Press N Seal.

I hope this post serves to make you an expert DIY drywall crack guru. Keep in mind the skill will take some practice and an excellent eye to perfect. I have included some affiliate links in this post for you to visit from which I do earn a cut for any purchase derived from these links.

Post was created by the Drywall Vancouver blogVancouver Drywall Contractors

Drywall Vancouver
82 E 37th Ave, Vancouver, BC V5W 1E2
(604) 229 – 3691



Attaching Drywall to Ceiling Joists


Installing a ceiling drywall is a tedious job that requires at least two people to accomplish. It is much easier to repair the drywall in Vancouver or plaster, but if a new drywall is necessary, this article will guide you step by step on how to successfully install a new drywall.

drywall ceiling that needs to be repaired

Step 1: Locate the Ceiling Framing

Identify where the ceiling joists are and mark their location on the wall. You can locate the joists by tapping on the ceiling and listening for the sounds. A hollow sound is an indication of open space while a solid sound indicates a wood framing. Alternatively, you can use a drill to locate the joists. Measure about 16 inches from the wall and drill through, if you meet some resistance and wood is ejected from the drill hole then that indicates the presence of a joist. Check for all the beams and mark their centers on both ends of the wall. You can use a chalked string to mark the locations of the middle of the joists.

Step 2: Framing Layout

Fasten the first furring strip along one end of the wall, and then install the other furring strips at 16-inch intervals. At the other end of the wall ensure that you install another furring strip along the wall just like the first one even if the distance between it and the previous strip is less than 16 inches. The furring strips should be installed perpendicular to the joists. When you have installed all the furring strips, mark the centers of each strip with a non-staining marker or pencil along the wall.

Step 3: Drywall Layout

Before you begin your drywall installation, ensure that you are using the approved material as some jurisdictions require fire-resistant drywalls (Type X) for ceiling installation. Hang the drywall along the corner of the first wall parallel to the furring strips. Utilize full sheets as possible to fill the space and at the end of the run, if you need a smaller piece of foil, cut the sheet into size to fit the last area ensuring that the opened end butts of the layers are together. For the second row, start with a full sheet at the opposite end of the room. Ensure that the sheets join the first row with the finished edges being together. Use as many whole leaves as possible finishing with smaller pieces when necessary. Always ensure that when joining sheets together, polished edges mate with finished edges and open edges mate with free edges.

Step 4: Hanging the drywall sheets

Use construction adhesive to secure the drywall sheets in place. Using the glue ensures that you use fewer screws to obtain the sheets. Lift the first layer into place and push it into the corner touching both walls. Ensure that half the furring strip is visible on the outer edge and supports the sheet. Use a screw gun that has a clutch function to sink the heads uniformly just below the surface to ensure that paper covering does not tear. Use a chalked string marking the length of the furring strips to drive the other screws. You can use a homemade tee for support while hanging the drywall which will make your work even more comfortable.

This post was written by our very own, Kevin of Drywall Vancouver

Drywall Vancouver
82 E 37th Ave, Vancouver, BC V5W 1E2
(604) 229 – 3691

Drywall Repair Vancouver

I Have a Water Damaged Ceiling, What Should I Do?


There are some situations where water can be a real problem. If water saturates your drywall or ceiling, it can make them look damaged, or if there is enough water, it can cause actual damage. Walls and ceilings can be repaired as long as you know to do so. This repair guide can give you step by step instructions on how to improve your home if you are facing water damage.

drywall finishing contractors needed for this water damaged ceiling

Step One: Find the Leak

The location of some leaks is visible. They may show visible signs of damage. Ceiling drywall may crumble under the weight of the water. There are sometimes when you may notice coffee-colored stains that tend to get bigger as time goes on.

Before you fix anything, you are going to need to find the source of the leak. This can be aggregating but if you do not know where the problem is you cannot fix it. If the roof is leaking or if there is a leaky pipe it can be hard to find the exact location of the problem. Water can travel far and can cause a lot of damage. You will need to investigate the source of your leak. If the drywall is damaged, it should be removed so that you can find the source of the leak and dry out the area.

If there is mold present, you can take precautions to remove this on your own. You need to put on safety gloves, safety goggles, and a mask, so you do not breathe in any mold spores.

If there is a great deal of damage that has been done by the water you may need to call in a professional drywall contractor to find the leak and repair the damage.

Step 2: Remove Damaged Dry Wall

Before removing the drywall put a tarp or a cloth down to catch all of the debris and dust that is going to come from the drywall. This will make the cleanup process more manageable.

Before starting the drywall removal check and see how much damage is done. If the drywall is damaged by the water, it will begin to sag or crumble. Use the claw end of the hammer to remove the damaged area. A wrecking bar can also be used. If the panels are only stained, you may be able to get away with cutting out the damaged section. When cutting out the damage use, a keyhole saw to cut out a square or a rectangle. You can then use another piece of drywall to patch up this open area.

Step 3: Make the Repairs

If you are patching up an area, you need to measure a square or a rectangle to cover the area that you cut out. When measuring out the drywall be to make that it is two inches longer and two inches wider than your measurement. Put the replacement piece on the drywall. The backside should be facing up. Once this is done measure an inch from all four edges and draw a line around it. This should be right under the hole. Use a straight edge knife or a utility knife and cut the back side of the paper of the drywall. Do not cut the front facing layer. Use a putty knife and remove the backside layer as well as the thickness of gypsum. Do not tear the front side of the paper.

If the hole is more significant than six inches and is up to one foot, there is a different process you will need to do to patch up the mess. Use a drill to make two holes in the piece that is going to be used as a replacement. Put a piece of string through each hold and tie both ends to the middle part of a stick. Keep eight inches of line between the board and the stick. The stick side will be the front. The purpose of this board is to hold the piece in place. To apply pressure twist the twice at the rear of the board. Add a coat of cement around the edges. Put this patch over the hole so the glue can hold to the area around the hole. Twist the string to increase pressure and keep it firmly in place. This will allow the board to stay put until it dries.

If you are repairing a hole that is less than six inches put some joint compound around the hole. Put the patch piece around the hole. Using a putty knife put the paper edges down. Feather the edges and then allow it to try. Sand this area lightly then apply a second layer of compound.

If the hole is between six and twelve inches, allow the cement to dry before using the joint compound. Soothe out the area and then let it dry.

When the area is dry sand the rough spots with a fine grit sandpaper or a sanding block.

If the damage is more significant than 12 inches, you may need to replace the entire panel. This will depend on where the damage is located. If the space that needs to be replaced will leave exposed joints or studs, you may be able to screw in a security patch. If not you may need to replace the entire piece of drywall.

To replace an entire sheet of drywall remove the damaged area right down to the stud. Remove the screws as well. If the old drywall is damaged, it will often crumble.

Measure the height and the width of the area that needs to be replaced. If there is an irregular pattern, you may need to cut it out with a putty knife. Line up the new panel with the sets and secure them in place with new studs. Cover the seams with joint tape. Apply the joint compound over this tape. Allow it to dry then sand it smooth.

Step 4: Prime Then Paint

Use a primer/ sealer with a paintbrush or roller. Be sure to cover the entire wall surface.

Using the premium interior paint cover this area. Paint a six-foot section utilizing a W stroke. Move the brush from right to left and then back from left to right.

To make sure the coverage is even going from the bottom to the top of the wall. Use one direction strokes that overlap each other.

Using a small angular paintbrush get the areas where the roller cannot see such as the corners.

If needed apply a second coat of paint in the same manner. If you allow the paint to dry between coats, you will get a better result.

Step 5: The Cleanup

A shop vacuum can be used to clean up most of the dirt and debris. Pick up the traps and close up the paint cans. Dispose of applied paint as according to the directions. Rinse off the paint brushes with warm water. Allow them to dry before storing. Remove any painter’s tape. The longer it is left on the wall, the harder it is to remove.

Good job!! Now you know how to perform a home drywall repair, ceiling repair, and fix water damaged walls.

This post was created by the Vancouver drywall repair of www.drywallvancouver.ca

Drywall Vancouver 
82 E 37th Ave, Vancouver, BC V5W 1E2
(604) 229 – 3691

Level 5 Drywall Finish Cost


Level 4 Drywall Finish

Many people involved in the world of home improvement know about the level 4 drywall finish. It’s considered the quintessential drywall finish, in fact. It consists of applying an additional coat of joint compound onto the tape and the screws. From there, it’s important to sand the dried compound entirely. This is a relatively primary process.

Level 5 Drywall Finish

A level 5 drywall finish is different automatically. This is drywall finishing at the highest possible level in the home improvement world, at least within reason. A level 5 drywall finish is characterized by the application of a skim coat. There are many different ways to get the skim coat applied evenly and efficiently. People should choose one or the other by which materials they have and on the nature of the job itself. The method will also have a significant effect on the budget.

Level 5 Drywall Finish Cost

Overall, the level 5 drywall finish cost should not be overly high for the people who already have a decent budget for home improvement. The skim coat cost itself will usually be about 0.90 dollars for each square foot. However, there is a price range involved. The skim coat cost per square foot could be as high as 1.07 dollars in some cases. People will often be working within a relatively large space. Spending around five hundred dollars for this part of the job should be very common in most cases.

There might be some additional costs to consider. The exact means by which people apply the skim coat will make all the difference in the world with regards to the budget and the amount of money that people spend.

Additional Factors

Many people will choose to spray on the skim coat, which will probably be a relatively easy option for a lot of homeowners. However, it does require a lot of specialized equipment, which is why it is the primary option for a lot of professionals.

Some homeowners will just rent the equipment that they need to take advantage of the spraying option. The material is available at rental yards. Some people might want to buy the stuff at home improvement stores, but this is undoubtedly going to be an expensive option for most people. They probably will not have the budget for it.

Using a roller should be much less expensive in almost all cases. Rollers are not costly. Thinning out the mud and then rolling it onto the wall might be somewhat physically demanding for some people, however. Other people might find it easier to apply the skim coat through the use of a taping knife.

Taping knives and rollers are less expensive than the professional equipment that people would use for this step otherwise. However, the expert equipment might be necessary for the people who are trying to operate quickly, especially if they have some issues physically with the other methods. People who use professional equipment will spend more than five hundred dollars to apply the skim coat, but this might be worth it for them.

Article was written by https://www.drywallvancouver.ca – The top drywall company in Vancouver

Drywall Vancouver
82 E 37th Ave, Vancouver, BC V5W 1E2
(604) 229 – 3691

How To Become A Drywall Contractor


A drywall repair expert outside of a home planning his day

If you are employed as a drywall contractor, you probably know that the work can be dusty and demanding, often involving working on scaffolding or ladders, in confined spaces and having to wear goggles or other protective gear. The procedure of installing drywall involves measuring the panels, and then cutting them and fastening them in place, and drywalling is a standard feature in many commercial buildings as well as homes.

A contractor may also have the task of patching over any nail holes, using the sealing compound to cover the joints and sanding the joints to make them smooth. However, some other workers often carry out these extra tasks, and these workers are sometimes known as tapers. In 2015, $39,220 was the median salary per year for a drywall contractor and anyone working to install ceiling tiles.

A Career As a Drywall Contractor

1) Get Your HS Diploma

You may need to have a GED or diploma, depending on the training program you are taking part in, although in many cases that isn’t a requirement. An excellent introduction to the basics of working in this industry can be obtained from shop courses and high school math.

high school graduation ceremony filled with future drywall contractors

2) Training With a First Job

Some employers offer on the job training, and for many people interested in working in this area, it is an obvious first step. You should reckon on at least a year of training during which you gain a useful insight into how a drywall contracting company operates. And it’s a great way to get some essential hands-on experience.

3) Licensure

Different states have different requirements when it comes to licensing. You may be required to have a certain amount of relevant experience to work as a drywall installer, or you may be expected to complete a specific training program.

4) Your Own Business

Starting and operating your own business is the dream of many once they have at least several years of working for one of the drywall companies. Being able to manage a small business and accounting are both useful skills for anyone wanting to work for themselves.

Drywall Companies Vancouver

Drywall Vancouver
82 E 37th Ave, Vancouver, BC V5W 1E2
(604) 229 – 3691

Drywall Vancouver

Drywall Vancouver
82 E 37th Ave, Vancouver, BC V5W 1E2
(604) 229 – 3691
[email protected]
Open 24 Hours

To get in contact with the designer of the website please call (604) 562 – 8543 and ask for Roson.

If you’re looking for a FREE estimate then please contact (604) 229 – 3691.

Drywall Vancouver Sitemap

Call Now ButtonTap Here For Your FREE Quote