Easy Drywall Installation Tools And Equipment


Why Should You Consider Drywall?

If you have ever dreamed of building your dream home, then the main thing that has probably put you off is the costs involved. There are a lot of different factors to think about when you are considering the costs of a house build. Not only will you have to purchase materials and equipment but you are also likely to need the services of engineers and architects, although they may be able to help by suggesting ways that you can reduce costs.

Many construction firms are now suggesting that people use drywall in their new homes. Drywall Vancouver companies can be used as partitions to make each room separate, and they are much easier to install than brick and cement walls as well as being a lot cheaper. They can be installed by a professional contractor efficiently in no time at all.


There are some reasons why drywalls are such a good alternative to bricks and cement. When the walls are completed, they will look good in your home, and they can be used for both walls and ceilings. Even though drywall is cheaper, it does not mean that you have to compromise on quality. Drywall is made from a material that is fire resistant and also waterproof and so is perfectly safe to use in all types of properties.


Drywall can also be used in houses that have already been built, to split a large bedroom into two smaller ones for example. Construction companies also prefer using drywall because it is far easier to install. Some different materials can be used to create drywall including wood, fiberglass and gypsum plaster.

There is a whole range of tools and equipment that can be used by contractors when they are installing drywall. The ten most common tools used for home drywall repair are listed below.


  1. Drywall T-Square. When a T-Square is used, then you can be sure that the drywall will fit perfectly and can be lined up accurately. T-Squares can also be used for other jobs so are a useful piece of equipment.
  2. Drywall Lifts. A drywall lift can be used to hold the wall in place while it is affixed to the ceiling. This means that a contractor can complete the job on his own as they won’t need to ask anyone else for help supporting the wall.
  3. Drywall Router. If there is anything that needs to be put on the drywall such as a window or a hole for a pipe to pass through, then this can be cut out of the drywall using the router.
  4. Taping Knife. This is sometimes also referred to a finishing knife and can be used to remove any uneven edges from the sides of the wall.
  5. Circle Cutter. If you need to cut a circular shape into the drywall, then a circle cutter will be the best tool to use.
  6. Keyhole Saw. This is a saw which is long and narrow and can be used to cut small shapes into drywall. They can either have a fixed blade or retractable blade.
  7. Power Jigsaw. This tool can be used if you want to carve an intricate design into your drywall. Care should be taken as it is a powerful tool.
  8. Rasp. A rasp is a long tool with sharp edges which can be used to shape wood and the other materials that drywall can be made from.
  9. Utility Knife. A utility knife is a small tool that has many different functions, and many contractors consider this to be one of their most essential pieces of equipment.
  10. Drywall Saw. This type of saw is most suited to drywall that is made from wood, but it can be used with a harder blade for softer materials. The saw will usually have either rough or serrated edge.


Drywall Contractors

Most contractors will use some combination of these tools to install drywall within a home. This is because all of the tools help to make the job easier and they can also make sure that the job is finished to a higher standard. Drywalls are an excellent choice to use in the construction of a home because they are a very viable option and when these tools are used drywall installation also becomes very easy.

Vancouver Drywall Companies

Drywall Vancouver
82 E 37th Ave, Vancouver, BC V5W 1E2
(604) 229 – 3691

How To Repair Recurring Cracks In Drywall Part 1

Repairing cracks in walls can be a hassle especially when the breaks keep coming back. Reasons for the recurrence of these cracks which can be annoying may be as a result of shoddy repairs or use of the wrong materials for reconstruction. It is crucial to repair the break as soon as you notice it even if it is at a place where no one would quickly notice like behind the furniture. If you deal in rental homes, you will also need to repair a lot of drywall crack as you prepare houses for new homeowners.

a drywall crack that needs to be repaired

This article is meant to be a reliable guide when making quality and permanent DIY repairs.

First things first, you will need to have the following materials for your project to success:

  • Fiberglass mesh drywall tape
  • 3M Patch Plus Primer
  • Putty Knife
  • 6-inch drywall knife
  • Joint compound mud pan
  • Sanding sponge
  • Towel for the floor
  • Your wall paint
  • A few episodes of your favorite show

These are easy to find and buy at any hardware store close to you.

With the materials above at hand, you are now ready to begin repairing your drywall cracks.

It is vital that you follow these instructions carefully to get quality drywall crack fix:

  1. Apply the Fiberglass Mesh drywall Tape to the crack on your wall
    When fixing cracks, most people make the mistake of adding joint compound or spackling directly to the drywall. When you do this, the blow will eventually come back since the mixture, or spackling cannot hold the break by itself. To fix cracks on drywalls, the mesh tape is essential. The Fiberglass mesh drywall tape, in this case, is meant to add the support needed by the compound to hold the two sides of the crack together.
    You should make sure that the tape is centered on the crack. This is done by placing the sticky side on the wall and then getting your Patch Plus Primer ready.
  2. Apply a thin coat of the Patch Plus Primer to the Mesh Drywall tape
    The 3M Patch Plus Primer works well when repairing cracks and holes on drywalls because one does not need to apply a primer coat needed when using a traditional joint compound. This saves the user time and even money that would be spent in buying additional materials. However, when purchasing the 3M Patch Plus primer at your selected store, it is essential to ensure that it is unopened. This is because the content may be harmful which renders it unusable as it won’t give you the desired results. This should also be considered when purchasing other products that are packed in containers, and this includes the pre-mixed joint compound.

Written by Drywall Vancouver | Drywall in Vancouver

Drywall Vancouver
82 E 37th Ave, Vancouver, BC V5W 1E2
(604) 229 – 3691

water damage that needs to be ceiling repaired

Drywall Vancouver

Drywall Vancouver
82 E 37th Ave, Vancouver, BC V5W 1E2
(604) 229 – 3691
Open 24 Hours

To get in contact with the designer of the website please call (604) 562 – 8543 and ask for Roson.

If you’re looking for a FREE estimate then please contact (604) 229 – 3691.

Drywall Vancouver Sitemap

Tap Here For Your FREE Quote